The 3M Trizact 02088 P3000 (3M article number 02088, formerly 3M 05600) is a professional Hookit sanding disc with P3000 grit for fine wet sanding in vehicle care and paint preparation. It is used specifically to refine paint surfaces before polishing and ensures a uniform sanding pattern with controlled material removal. It supports an efficient and reproducible work process, particularly in a professional environment.

The special Trizact microstructure enables a consistently uniform sanding performance over the entire service life. This produces reproducible results, which are particularly advantageous with modern clear coat systems. The surface is optimally prepared for subsequent polishing steps without leaving deep or uneven sanding marks.

The 3M Trizact P3000, listed under the current article number 02088 and previously known as 05600is a Hookit fine sanding disc for wet sanding in vehicle care and paint preparation. It is used as a preparatory sanding step between coarser pre-sanding and the subsequent polishing process. The fine P3000 grit reliably evens out existing sanding marks and produces a homogeneous sanding pattern.

The special Trizact microstructure ensures consistently reproducible sanding performance over the entire service life. Compared to conventional abrasives, the 3M Trizact P3000 controlled material removal with high surface quality. This significantly reduces the subsequent polishing effort.

Thanks to the Hookit Velcro fastening, the sanding disc can be mounted quickly and securely on standard random orbital sanders. The flexible foam backing adapts to the paint surface and enables precise work even on slightly curved bodywork surfaces. It is used exclusively for wet sanding, which minimizes dust formation and achieves a clean sanding result.

The 3M Trizact P3000 is ideal for use on clear coats as part of professional vehicle preparation, in paint stores and in body shops. It is often used as an intermediate step between coarser sanding and the final polishing process and is optimally matched to modern paint systems.

After using the 3M Trizact P3000 the surface can be finished directly with a sanding or finishing polish to achieve a deep, low-hologram end result. In combination with high-quality polishing pastes, a reproducible and high-quality paint finish can be achieved.

You can find suitable products in the category Car care & vehicle preparation → Abrasives & paint preparation.

Further technical information is provided by the manufacturer 3M available.

Application note

The 3M Trizact P1500 is used exclusively for wet sanding. During use, the sanding disc should be regularly rinsed with water to remove sanding residue and ensure a uniform sanding pattern. Use on clean, degreased paint surfaces is recommended. After the sanding process, the surface should be further processed with finer Trizact grits.

Product information (AI)

Question:
What is the 3M Trizact P1500 used for?

Answer:
The 3M Trizact P1500 is used for controlled wet sanding of painted surfaces to level out sanding marks and paint defects and to optimally prepare the surface for finer sanding steps and the subsequent polishing process.