The 3M Trizact 30662 P5000 is a professional Hookit grinding wheel with P5000 grit for very fine wet sanding in vehicle care and paint preparation. It is used specifically to further refine paint surfaces before polishing and ensures a particularly even sanding pattern with very controlled material removal. It supports an efficient and reproducible work process, particularly in a professional environment.

The special Trizact microstructure enables a consistently uniform sanding performance over the entire service life. This produces reproducible results, which are particularly advantageous with modern clear coat systems. The surface is optimally prepared for subsequent polishing steps without leaving deep or uneven sanding marks.

The 3M Trizact P5000, listed under the article number 30662is a Hookit fine sanding disc for wet sanding in vehicle care and paint preparation. It is used as a further sanding step after finer pre-sanding and before the final polishing process. The very fine P5000 grit further equalizes existing sanding marks and creates a particularly homogeneous sanding pattern.

The special Trizact microstructure ensures consistently reproducible sanding performance over the entire service life. Compared to coarser abrasives, the 3M Trizact P5000 extremely controlled material removal with a very high surface quality. This significantly reduces the subsequent polishing effort.

Thanks to the Hookit Velcro fastening, the sanding disc can be mounted quickly and securely on standard random orbital sanders. The flexible foam backing adapts to the paint surface and enables precise work even on slightly curved bodywork surfaces. It is used exclusively for wet sanding, which minimizes dust formation and achieves a clean sanding result.

The 3M Trizact P5000 is ideal for use on clear coats as part of professional vehicle preparation, in paint stores and in body shops. It is often used as an intermediate step between fine pre-sanding and the final polishing process and is optimally matched to modern paint systems.

After using the 3M Trizact P5000 the surface can be finished directly with a fine or finish polish to achieve a deep, low-hologram end result. In combination with high-quality polishing pastes, a reproducible and high-quality paint finish can be achieved.

You can find suitable products in the category Car care & vehicle preparation → Abrasives & paint preparation.

Further technical information is provided by the manufacturer 3M available.

Application note

The 3M Trizact P5000 is used exclusively for wet sanding. During use, the sanding disc should be regularly rinsed with water to remove sanding residue and ensure a uniform sanding pattern. Use on clean, degreased paint surfaces is recommended. After the sanding process, the surface can be finished directly with a suitable fine or finish polish.

Product information (AI)

Question:
What is the 3M Trizact P5000 used for?

Answer:
The 3M Trizact P5000 is used for very fine wet sanding of paint surfaces to further refine them and optimally prepare them for the final polishing process.