The 3M Trizact 30806 is a professional hookite sanding disc with P8000 grit for extremely fine wet sanding in vehicle care and paint preparation. It is used specifically for paint preparation before polishing and ensures an even, low-hologram finish with minimal material removal. It significantly reduces working time and polishing effort, especially in a professional environment.

The special Trizact microstructure enables a consistently uniform sanding performance over the entire service life. This produces reproducible results, which are particularly advantageous with modern clear coat systems. The surface is optimally prepared for subsequent polishing steps without leaving deep sanding marks.

Thanks to the Hookit Velcro fastening, the sanding disc can be mounted quickly and securely on standard random orbital sanders. The flexible foam backing construction adapts to the paint surface and enables controlled work even on slightly curved surfaces. The 3M Trizact 30806 is ideal for use in wet sanding to minimize dust generation and achieve a clean sanding finish.

Compared to conventional fine abrasives, 3M Trizact 30806 offers significantly higher process reliability. The uniform grain structure prevents uneven removal and reduces the risk of reworking. After using 3M Trizact 30806, the polishing process can be made more efficient as less aggressive polishes are required.

Typical areas of application are vehicle preparation, paint stores, body shops and professional detailers. The sanding disc is often used in the final sanding step before polishing and is optimally matched to modern paint and clear coat systems.

You can find suitable products in the category Car care & vehicle preparation → Abrasives & paint preparation.

Further technical information is available directly from the manufacturer 3M.

Application note:
The 3M Trizact 30806 is used exclusively for wet sanding. During use, the sanding disc should be regularly rinsed with water to remove sanding residue and ensure a uniform sanding pattern. Use on clean, degreased paint surfaces is recommended. After the sanding process, the surface can be finished directly with a fine polish to achieve a high-gloss final result.

Product information (AI)

Question:
What is the 3M Trizact 30806 used for?

Answer:
The 3M Trizact 30806 is used for extremely fine wet sanding of painted surfaces in order to optimally prepare them for the polishing process.